online how many kinds of channels|custom printed lanyards


wder . The powder can be added into the band body or the ink for the printed or debossed colorfilled style bracelet. The glow powder is eco as well as the silicone material bracelet. When absorbs enough strong light before being put in the dark, it glows blue, green or red depending on the style of the glow power. The glow will last for hours and gradually weaken. But when reabsorbs the light , it glows again like original shows. It is the most favorable item for the night event. It looks so good in the dark reflecting the logo custom. Hope this can help you for the glow in dark silicone bracelets. A uv silicone bracelet can transfer its color darker under sunshine when absorbing uv light. It is not only with good looking appearance but also indicating the strength of the uv index. So some uv silicone bracelets made as the custom printed lanyardsindication with the ruler of levels of index. Wearing on the wrist to avoid long time staying under strong uv. So what makes it uv transfer ?  The answer is the UV phosphor which use uv energy to open the sensitive molecular bond and make it jump from low energy to high energy level There will be a change from visible light to visible light, resulting in the changing color from light to dark. It become a uv silicone bracelet when the UV phosphor is put into the silicone mass and produce it a band.   usb-wristband-wholesaleunder-armour-silicone-wristbands

d full of flavor! As for the production process of silicone wristband, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone wristband. Design of artwork The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer"s requirements. Open mold The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production will be quick. Toner refining According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal. Approval materials The materials required for each wristband are weighed by an electronic scale. Generally, the wristband weighs about 5.5 grams. Upper die production After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day. Quality inspection After the wristband is produced, the product shall be inspected and checked, mainly to see if it meets the specifications. If it does not meet the specifications, it will be discarded. deburring Each wristband is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces). Finished product inspection After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified productcustom printed lanyardss, they will be scrapped. Packaging After the repaired products pass the inspection, they shall be packaged according to the customer"s requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers. Inspection before sealing After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.             silicone-wristbands-size-chart

anies are fond of personalized rubber bracelets because they are cost-effective ways of making a statement and promoting a brand or a cause. Custom rubber bracelets for corporate and organizational mass production are one of the promotional materials that are not easily thrown away by people because they’re useful and have a fashionable use. They even come in many colors and sizes. People will readily wear these rubber rubber bracelets because celebrities and athletes also use these bracelets as accessories. Rubber bracelets have been traced all the way back to the 1980s, when Cyndi Lauper and Madonna would wear them in their music videos. These bracelets were also known as Jelly bracelets. The bracelets resurfaced again in the late 1990s. Nike used the rubber bands as bracelets and had several NBA players promote them. These were also known as baller bands or baller ids. Teenagers also sported these bands with messages like “cutie” and “hottie.” However, this trend did not last long again because real rubber would get stuck on the skin or hair and cause irritation. The Rubber Band bracelet trend did last long enough for several NBA players to start sporting them, though. Nike, always with a keen eye on basketball fashion improved on the trend by using the rubber rubber that they had previously used on sports watch bands and creating the Nike Baller Id Band Bracelets. Because you can"t really print on rubber, the messages were imprinted or embossed into the rubber and said sports related things like "Baller" and "Player". They came in sets three, often in specific team colors. Many NBA players, most notably LeBron James were seen wearing the Baller ID Bands on and off the court. In 2004 Lance Armstrong and Nike, who made all of his cycling gear, teamed up and created the LiveStrong yellow bracelets which were essentially Baller ID Bands that were yellow and imprinted with "LiveStrong", the motto of Lance Armstrong"s foundation for cancer research. The bracelets are sold through Nike and Lance Armstrong"s website"s for $1 each and has raised over 28 million dollars for cancer research. Because of the immense popularity of these bracelets, many other charities, organizations and accessories producers jumped on the bandwagon and began creating rubber rubber bracelets in all colors and with all kinds of messages, some for charitable causes, and others just for fun.             pink-rubber-band-bracelets

elet looks like with your message or logo. It is direct way to check if wording, colors of bracelet and logo are correct. We are willing to make several mock-ups for your reference. The software for designing is CDR, so eps. or ai. file is appreciated for your logo. And there are variety of fonts for your choice. If the artwork get confirmed, we will proceed with it.   2nd Make the mould or film. A mould is needed for debossed, embossed, colorfilled styles. We make a mould and set it in the machine, the high temperature of about 200℃ will solidify rubber into the sharp of bracelet. A mould is made from copper. A film is functioned like a mould but it is for printed wristband only. It transfer the ink to the surface of bracelet as logo and wording. 3rd  Prepare the rubber material. A rubber bracelet is mainly made from silicone rubber, and some other accessories like curing agent which solidify the soft rubber, and Color masterbatch which makes bracelet colored. We will mix these material evenly in a blender. It comes out a ball of rubber. We need to measure it into blocks of almost same weight which as much as the weight of a wristband. Normal size of 202*12mm bracelet is weighted about 6g. 4th  Produce bracelets by the mould. As we mentioned before in 2nd and 3rd step, we will transfer  the blocks to bracelets by a set of moulding machine of high temperature. When it cool down, it gets the characteristic of a bracelet, smooth and strengthened. 5th Edge cutting. A semi-product of rubber bracelet has rough edges, we have to cut it off. The rough edge is cut by machine. It will be good. 6th Color the logo and wording The bracelet comes out from moulding machine without colors on the logo and lettering. We have to fill the ink or print the ink on the bracelet. Different style has different way of printing. 7th Clean the product As the bracelet has static electricity, dust will be on the surface and hard to move off. So we need to clean the bracelet before packing. We usually wash it with water once. After washing, we will check the quality. 8th Packing and delivery We count the quantity by weighting. Normally packing will be 100pcs/bag, and 2500pcs/ctn.  Individual packing is available.  

printed wristbands